紫荆花红色素开发利用的研究

首次报道紫荆花红色素的提取纯化方法及红色素的理化性质，并与玫瑰茄红色素作对比研究，证实同属于花青甙类化合物，又经急性毒性试验证明其毒性极低，故紫荆花天然红色素具有开发利用的价值。     

MCSCF reaction-path energetics and thermal rate-constants for the reaction of3NH with H2

Summary The intrinsic reaction-path, reactants, transition state and products for the reaction of NH (^3–)+H₂ (¹ _g ⁺ ) NH₂ (²B₁)+H (²S) involving the lowest triplet electronic state of NH₃ were calculated using multi-configuration (MC) SCF methods. The calculated change of internal energy for the reaction of 11.0 kcal mol^–1 agrees with the experimental value within 2 kcal mol^–1. The barrier to reaction is 23.4 kcal mol^–1 high. The harmonic MCSCF reaction-path potential was calculated and canonical variational transition state theory calculations of the rate constants performed over a temperature range from 400 to 2500 K. The computed rate constants are generally two orders of magnitude smaller than those of the comparable reaction of OH with H₂, whereas those of the reverse reaction are by a factor of 20 larger than those of OH₂ with H.     

Quantum chemical calculations of the isomer shift in iron(II) complexes of 1,2,4-triazoles with a 1 A 1 ⇔ 5 T 2 spin transition

DFT calculations have been performed to determine the isomer shift for a series of iron(II) clusters with nitrogen-containing ligands which serve as models of coordination units in Fe(II) complexes with 1,2,4-triazoles possessing a ¹ A ₁ ? ⁵ T ₂ spin transition. Good agreement has been found between the theoretical and experimental values of the isomer shift for both low-and high-spin phases. Our calculations confirmed the hypothesis about relationship between the experimentally observed differences in the isomer shift for the low-spin phases of the complexes and variations of the Fe-N mean bond length.     

乙基乙酰胺热解反应机理的MO研究

对于烷基乙酰胺的初始热解反应机理, 通常认为与酯类的热解反应相类似。Maccoll和Nagra通过对该热解反应的动力学研究, 认为两者存在不同。差异之一, 烷基乙酰胺存在两种可能的热解途径【参见本文(129页)前述反应方程(1),(2)】。而在酯类热解反应中(2)的活化能过高, 且四元环过渡态极不稳定。差异之二, 极性溶剂(比如乙酸)对酰胺热解反应的催化作用不明显, 而对酯类等气相热解反应的催化作用是十分显著的。为此, 我们用MINDO/3分子轨道法对乙基乙酰胺的初始热解反应进行了较全面的研究。用能量梯度法对此反应的反应物、中间体和生成物的平衡几何构型进行了全优化。(如图1所示)用极小能量途径法分别寻找反应(1)和反应(2)的初始过渡态, 继而用Powell法全优化过渡态的几何构型, 计算所得的过渡态TS1、TS2和TS3分别见图2a, 图3a和图4a。为了确证这些过渡态, 进行了振动分析研究, 结果表明这些过渡态的力常数矩阵的诸本征值中均只有一个负值, 且虚振动模式展示了走向各自的反应物和生成物的趋势, (如图2b,图3b和图4b所示)。它们的总能量及反应(1)和反应(2)的活化能列于表1. 对整个热解反应(1)作了内禀反应坐标(IRC)理论分析, 反应历程见图5所示. 与IRC相应的总能偶极矩以及部分关键的键长和原子净电荷变化一并列于表2.本文研究结果表明, 在乙基乙酰胺的初始反应中主反应即反应(1)与酯类反应相类似, ...     

Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

一类新偶氮试剂的研究：Ⅴ.HQSAH催化荧光法测定Mn（Ⅱ）

基于Ｍｎ（Ⅱ）对试剂２－（８＇－羟基喹啉－５＇－磺基－７＇－偶氮基）－１－羟基－８－氨基一萘二磺酸（以下简称ＨＱＳＡＨ）分解反应的催化作用，提出了锰的荧光催化动力学分析新方法，其λｅｘ／ｅｍ＝２３０／４１５ｎｍ，适宜酸度范围为ｐＨ１１．０～１２．０，Ｍｎ（Ⅱ）含量在０～０．０８μｇ／ｍＬ呈线性关系，该法用于分析铸造铝合金中的痕量锰，效果良好。还初步探讨了反应机制，确定了反应动力学方程，测定了反应速率和活化能。     

Protein secondary structure and stability determined by combining exoproteolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the post-genomic era, several projects focused on the massive experimental resolution of the three-dimensional structures of all the proteins of different organisms have been initiated. Simultaneously, significant progress has been made in the ab initio prediction of protein three-dimensional structure. One of the keys to the success of such a prediction is the use of local information (i.e. secondary structure). Here we describe a new limited proteolysis methodology, based on the use of unspecific exoproteases coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), to map quickly secondary structure elements of a protein from both ends, the N- and C-termini. We show that the proteolytic patterns (mass spectra series) obtained can be interpreted in the light of the conformation and local stability of the analyzed proteins, a direct correlation being observed between the predicted and the experimentally derived protein secondary structure. Further, this methodology can be easily applied to check rapidly the folding state of a protein and characterize mutational effects on protein conformation and stability. Moreover, given global stability information, this methodology allows one to locate the protein regions of increased or decreased conformational stability. All of this can be done with a small fraction of the amount of protein required by most of the other methods for conformational analysis. Thus limited exoproteolysis, together with MALDI-TOF MS, can be a useful tool to achieve quickly the elucidation of protein structure and stability.     

Review of time lag permeation technique as a method for characterisation of porous media and membranes

The time lag permeation technique has proven to bean effective method for characterisation. Because of the simple nature of the permeation experiment, transport parameters can be directly obtained from experimental data hence avoiding the intensive mathematical treatment required by other techniques. The method has historically been applied to diffusion and adsorption in porous membranes and diffusion in polymer membranes. Since its origins in 1920, interest in the time lag method has expanded because of its value in characterising simple permeation processes and also complex systems of diffusion with simultaneous adsorption and surface diffusion. This review focuses on presenting the asymptotic solution of the mass balance diffusion equations and includes applications of time lag analysis, in order to give a critical and broad perspective of this method as a tool for characterisation. It includes much of the previously published literature in order to show that for most cases the asymptotic solution of the transport equations is simple, and for more complex cases that an analytical solution is possible hence avoiding cumbersome numerical techniques.     

硝酸甲酯与不同亲核试剂的SN2反应的理论研究

用从头计算和半经验分子轨道ＡＭ１方法分别对系列亲核试剂和硝酸甲酯的电子结构以及它们之间的气相ＳＮ２反应进行了理论研究，揭示了反应过程中体系的结构，能量和电荷的递变规律，由反应活化能得了这些亲核试剂的亲核性次序为：ＯＨ＾－〉Ｆ＾－〉Ｉ＾－〉ＮＯ＾－３〉ＣＮ＾－〉Ｂｒ＾－〉Ｃｌ＾－〉Ｎ＾－３。     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光